Kitchen Equipment Calibration Services in Goa | NABL Accredited

Comprehensive Service Offerings

As per our NABL (ISO/IEC 17025:2017) accreditation scope, we offer the following:

• Thermal Calibration: For cold rooms, deep freezers, blast chillers, refrigerators, ovens, fryers, and hot holding cabinets.

• Digital Thermometer Calibration: Verification of handheld probe thermometers, infrared guns, and meat probes used for internal temperature checks.

• Time & Timer Calibration: Ensuring the timing mechanisms on ovens and mixers are accurate for consistent recipe replication.

• Pressure Calibration: For pressure cookers, steam kettles, and espresso machine boilers to ensure safety and operational efficiency.

• Weighing Scale Calibration: Precision testing for digital scales to ensure recipe consistency and inventory accuracy.

Types of NABL Accredited Calibration Services Available

Our service portfolio addresses the full spectrum of thermal and mechanical instruments found in modern commercial kitchens.

• Blackbody Comparison Calibration: The gold standard for thermal imagers, where the camera is tested against a reference blackbody source at specific temperature points (e.g., 50°C, 100°C, up to 1200°C) to verify accuracy.

• Emissivity Determination: Calibration that validates the camera’s ability to adjust for different surface materials, crucial for accurate readings on reflective metals versus organic materials.

• Spatial Resolution & Uniformity Checks: Ensuring that the detector array provides consistent readings across the field of view, preventing false positives due to lens vignettes or sensor defects.

• On-Site Thermal System Validation: For fixed systems installed in production lines, we provide onsite comparison calibration to minimize downtime.

Get in touch

Share with visitors how they can contact you and encourage them to ask any questions they may have.

Phone

+91 91676 71931

Email

support@vegacalibrations.com

Industry Segments We Serve

Pharmaceutical & Biotechnology Manufacturing

Goa is a global hub for the pharmaceutical industry, with major plants located in Verna, Ponda, and Tuem. In this sector, thermal imaging is not just a maintenance tool; it is often part of the process validation and quality assurance protocol. Pharmaceutical units utilize thermal cameras to monitor the integrity of thermal insulation on bioreactors, steam traps, and critical utility piping. Any deviation in temperature maintenance can lead to non-compliance with FDA or WHO-GMP standards. Furthermore, thermal imaging is used to validate the performance of HVAC systems that maintain cleanroom conditions. Our calibration services ensure that the thermal cameras used by maintenance and QA teams in these facilities are performing within specified tolerances, providing the documented evidence required during regulatory audits. With the high humidity levels in places like Vasco da Gama, accurate thermal readings are essential to detect moisture ingress in storage areas which could compromise raw materials.

Electrical Power Distribution & Utilities

For the power sector and heavy industries scattered across Kundaim Industrial Estate and Bicholim, thermal imaging is the frontline defense against catastrophic electrical fires. This segment relies heavily on thermography to inspect High Voltage (HV) and Low Voltage (LV) panels, transformers, transmission lines, and switchgear. The ability to detect a "hot spot" caused by loose connections or unbalanced loads before a failure occurs is a massive cost saver. However, a thermal camera that drifts even by a few degrees can misclassify a critical fault as a minor issue, or vice versa. Vega’s calibration services in Goa ensure that the quantitative temperature data provided by these cameras is accurate. This is vital for utility providers and captive power plants in Sanguem and Quepem to maintain grid stability and worker safety, ensuring that predictive maintenance programs are based on reliable data.

Hospitality & Facility Management (HVAC)

Goa’s economy thrives on tourism, with massive hotels and resorts located from Calangute to Canacona. The hospitality industry utilizes thermal imaging extensively for building diagnostics and HVAC maintenance. In this segment, thermal cameras are used to detect cool air leaks, check the efficiency of air conditioning units, and identify moisture accumulation inside walls which leads to mold growth—a common issue in coastal areas like Mormugao. Efficient HVAC systems are crucial for guest comfort and energy cost reduction. A poorly calibrated camera might fail to detect significant thermal bridges or insulation failures, leading to skyrocketing electricity bills. Our services help facility managers in Mapusa and Margao ensure their diagnostic tools are sharp, allowing them to fix insulation breaches and moisture leaks precisely, thereby protecting the structural integrity of the property and ensuring a premium guest experience.

Food Processing & Cold Chain Logistics

The food processing industry, particularly seafood export units in Corlim and Curchorem, relies on strict temperature control. Thermal imaging is increasingly used for non-contact spot checks of food temperatures on conveyor belts, verifying the seal integrity of packaging (heat sealing), and monitoring the performance of blast freezers. In the cold chain, thermal cameras help identify temperature leaks in reefer trucks and cold storage warehouses. Compliance with HACCP (Hazard Analysis Critical Control Point) requires that any instrument used to monitor critical limits be calibrated. If a thermal camera used to verify a cooking or freezing process is inaccurate, it could lead to food safety hazards or spoilage. Vega’s NABL accredited calibration ensures that food processors in Goa can trust their thermal data, safeguarding public health and brand reputation while meeting the stringent requirements of export authorities.

Industrial Use Cases

Preventing Electrical Fire Hazards in Industrial Parks

In the bustling industrial zones of Verna and Kundaim, electrical fires are a primary safety concern. Maintenance teams use thermal imaging cameras to scan Motor Control Centers (MCC), busbars, and fuse boxes. Use Case Scenario: A manufacturing plant in Tivim conducts quarterly thermographic surveys. They look for temperature differentials (Delta T) between phases. A 10°C rise might indicate a loose connection, while a 50°C rise indicates imminent failure. Calibration Importance: If the camera is out of calibration and reads 15°C lower than the actual temperature, a critical "red alert" fault might be categorized as "monitor only." This negligence can lead to a panel fire, halting production for weeks. Vega’s calibration certifies that the camera’s readings are traceable to national standards, ensuring that when the camera says "danger," the maintenance team knows it is time to act immediately, potentially saving the facility from disaster.

Building Envelope & Moisture Detection in Coastal Resorts

Hotels and heritage properties in Panaji and Salcete face the relentless Goan monsoon. Thermal imaging is the most effective non-destructive method to detect water intrusion behind stucco and concrete before visible damage occurs. Use Case Scenario: A facility manager at a resort in Varca uses a thermal camera to scan the building facade after a storm. Evaporative cooling causes wet areas to appear cooler in the thermal image. Calibration Importance: The temperature difference between dry and wet masonry can be subtle (often less than 2-3°C). A camera with poor thermal sensitivity or drift will miss these subtle gradients, allowing water damage to spread unnoticed. By calibrating these instruments, Vega ensures the sensor’s sensitivity is maximized, allowing early detection of leaks. This use case is critical for preserving the high-value infrastructure that drives Goa’s tourism economy.

Process Control in Injection Molding & Manufacturing

The light engineering and plastics industry in Mapusa and Bicholim uses thermal imaging to monitor the temperature distribution of molds and dies.Use Case Scenario: An injection molding company produces automotive components. To ensure the plastic cures correctly without warping, the mold surface must have a uniform temperature profile. Operators use handheld thermal cameras to check the die temperature periodically.Calibration Importance: If the thermal camera displays an uneven temperature map due to sensor non-uniformity (and not the mold itself), the operator might unnecessarily adjust the cooling lines, ruining the process parameters. This leads to rejected parts and material waste. Vega’s calibration includes uniformity checks, ensuring that the camera accurately depicts the thermal reality of the mold, resulting in consistent product quality and reduced scrap rates.

FDA/GMP Compliance in Pharmaceutical Storage

For pharmaceutical companies in Ponda and Verna, storing temperature-sensitive vaccines and drugs requires rigid environmental monitoring. Thermal imaging is used to map warehouses to find "hot spots" or "cold spots" where air circulation is poor.Use Case Scenario: Before installing permanent loggers, a QA team uses a thermal camera to scan a new cold storage room to identify areas near doors or lights that might breach the 2°C-8°C limit.Calibration Importance: Regulatory auditors (USFDA, MHRA) demand that any instrument used for such validation be calibrated. If the thermal camera underestimates the heat near a loading bay door, drugs stored there could degrade. Vega provides calibration certificates that serve as proof of accuracy during audits, confirming that the thermal mapping study was conducted with reliable instrumentation, thus protecting the license to manufacture and export.

Compliance & Audit Requirements

In industrially advanced landscape, data integrity for temperature measurement is the key to passing inspections:

• ISO/IEC 17025:2017: The global standard for calibration laboratories. Vega’s accreditation ensures that your thermal imaging reports are technically valid and internationally accepted.

• 21 CFR Part 11 & GMP: For pharma clients in Goa, instruments used for quality decisions must be calibrated. Our reports support your validation documents (IQ/OQ/PQ).

• HACCP & ISO 22000: In the food industry, temperature is a Critical Control Point (CCP). Calibration provides the necessary verification for food safety audits.

• NFPA 70B: The standard for electrical equipment maintenance recommends regular infrared inspections. Accurate calibration is required to classify the severity of faults correctly.

Why Vega is Your Trusted Calibration Partner

At Vega, we don't just act as a vendor, we act as an extension of your Quality Assurance team.

• Pan-India Reach with Local Focus: While we serve the entire nation, our dedicated logistics ensure seamless service for clients in Goa, from the northern reaches of Pernem to the southern tip of Canacona.

• Technological Leadership: We use state-of-the-art Blackbody sources that offer stability better than the cameras being tested, ensuring a true test of accuracy.

• Rapid Turnaround: We understand that your maintenance schedule in Verna or Kundaim cannot wait. We offer expedited services to get your equipment back in the field.

• Audit-Ready Certificates: Our certificates come with full traceability data, uncertainty calculations, and reference standards details, making your external audits smooth and stress-free.

Frequently Asked Questions (FAQs)

Q: How often should I calibrate my thermal imaging camera in Goa?

A: Manufacturers and standards like ISO 17025 generally recommend annual calibration (every 12 months). However, for critical applications in Pharma (Verna/Ponda) or high-risk electrical inspections, a 6-month interval may be preferred.

Q: How often should I calibrate my commercial oven and freezer?

A: As per general FSSAI and ISO guidelines, kitchen equipment should be calibrated at least once a year. However, for critical control points (like blast chillers or meat thermometers), every 6 months is recommended.

Q: Can Vega calibrate thermal cameras from FLIR, Fluke, and Testo?

A: Yes, our facility is equipped to calibrate thermal imagers from all major manufacturers, including FLIR, Fluke, Testo, Keysight, and others, ensuring manufacturer-spec accuracy.

Q: Why is kitchen equipment calibration necessary for my restaurant ?

A: Calibration ensures your food is cooked and stored at safe temperatures, preventing foodborne illnesses and ensuring compliance with FSSAI regulations. It also helps in maintaining consistent food quality and reducing energy bills.

"We run a large pharmaceutical formulation plant in Verna Industrial Estate. The accuracy of our thermal cameras is critical for our HVAC validation. Vega’s calibration service was professional, timely, and the documentation was perfect for our recent regulatory audit." — Associate Director, Quality Assurance, Verna

"As a luxury resort in Cavelossim, moisture detection is key to our maintenance. Vega calibrated our thermal guns which helped us pinpoint a hidden plumbing leak that was causing dampness. Their service in Goa is top-notch." — Chief Engineer, 5-Star Hospitality Group, South Goa

"Our power transmission audits in Kundaim and Bicholim rely on accurate thermal data. Vega’s team turned around our equipment in record time. It’s great to have such a reliable partner for NABL services accessible from Goa." — Senior Manager, Electrical Maintenance, Heavy Engineering Unit

Customer Testimonials